| GL-WF02 | Side warning lights | Center lighting lights |
Light source | 16 leds f5 RGB | 1 main light + 6 auxiliary lights |
Light current | 7mA*16 leds=112mA | 200mA - 600mA |
Light modes | Double blink - Alternate quick - Single blink - Alternate slow - Red/blue alternate - Red/green alternate - Blue/green alternate | Weak - Strong - Auxiliary |
Wave length | R: 630 / G: 525 / B:465 | |
Luminous intensity | R: 1500cd / G: 8000cd / B: 4000cd | 120lum - 350lum -50lum |
Brightness | | 1500Lux - 6000Lux |
Light power | 0.08W | 1W - 2W |
Working time | 120hrs | 15hrs - 5hrs - 40hrs |
Materials | PC + silicone | PC + silicone |
Storage temperature | -40~+60 ℃ | -40~+60 ℃ |
Rated voltage | 3.7V | 3.7V |
Battery capacity | 3500mAh rechargeable Li-Ion battery |
Battery cycles | 1200 Cycles |
Dimension | 105mm(Diameter)*39mm(Height) |
Weight | 200g |
Charging current | 1.5A |
Charging time | 3hrs |
Waterproof grade | IP68 |
Important safeguards:
1. Read all instructions before operating.
2. Do not look directly at the light; may cause injury to your
eyes.
3. Turn off all lights before charging.
4. So not use alcohol, flammable solutions, or other solvents on or
near this unit, only
clean with warm water and a soft cloth.
5. Administer close supervision when using around children.
6. Waterproof only when used in accordance with manufacturer's
instructions
Charging:
The flare may be charged using either a 12-24v DC charger or 230vAC
charger(included).
1. Plug the USB plug into the appropriate 12-24v or 230v charging
adapter, depending
on your application.
2. Plug the male end of the USB cable into the female port of the
magnetic connector
hub.
3. Connect the magnetic connector hub to the flare alighting the(+)
and (-) terminal
symbols on each. The magnet in the center will keep the two items
connected.
4. Plug the 12-24v or 230v charging adapter into either a 12-24v
power receptacle or
230v wall outlet;
* Green LED=charge in process
* Red LED=fully charged or the flare and hub are misaligned and
need to be adjusted
Range of use:
1. Safer and ecologically better for our environment than flame
style emergency road
flares. No spark, open flame , fumes or toxic chemicals are
produced when using the
led road flare.
2. Shock resistant construction makes the flare very durable and
can withstand the
impact of roadside traffic. Can even be run over by a truck and
still operate. Used by
fire, police and other emergency responders.
3. Lie flat or on its edge depending on your reference. Place on
the road, at
construction sites, vehicle bumper or other surface, and anywhere
needing emergency
signaling.
4. The Led road flare is waterproof so it may be used for marine
applications and
safely in wet environments, including submerged to a depth of 10
meters. Will float
unless secured.
5. Using the magnet on the back, attach to any magnetic metal
surface. Place on a
vehicle, fence or other metal surface. NOTE: It is not recommended
that you disassemble the flare.
If it is not reassembled correctly it may result in failure of the
waterproof seal and damage to the unit.
Scope of application
1. Damaged vehicle traffic warning;
2. Police road planning signs;
3. Surface buoys and maritime salvage signs;
4. Used for identification of emergency vehicles, such as
ambulances, helicopter
landing area identification;
5. Heavy vehicle transport warning;
6. Rescue operation signs;
7. Emergency or temporary runway signs;
8. Campsite or hiking trail signs;
9. Field lighting;
10. Underground mining harsh environments;
Our Services
1.We also can provide OEM,OED special mining lamps according to
your detail requirement(LOGO,color,appearance,function, structure
etc)
2. High quality and competitive price .
3.Can according to your requested to design new item that suitable
for your market.
4.Our company's product has one year warranty.
Accept Customized as client's requirements:
Appearance
Strong ID Team, According to client's market positioning, use
condition to design product shape, pattern and colour. Recently,
customized the semi-corded, corded, cordless with Tracking position
and Infrared receiver
Electronic Circuit
Rich Experience Software and Hardware Engineers, PCB's Design and
Layout. LED Driver, Charging circuit, Battery Protection Circuit
and so on.
Write the request to cap lamps, such as clients company name, LOGO,
serie No and user name.
Structural Design
Professional MD Team, provide IP68 Waterproof, ATEX
explosion-proof, Dust-proof Products, 17 years work experience in
underground field. Very familiar with miner's lamp industry
products. MD team will field visit and according the use condition
to design the waterproof.
Optical Design
According to LED Luminous Flux, Light cup curve and current to
design the Light Beam
FAQ
Q: Can I have a sample order?
A: Yes, we welcome sample orders to test and check quality. Mixed
samples are acceptable.
Q: What is the lead time?
A: Sample needs 7-10 days, and mass production time needs 25-30
days.
Q: Do you have any MOQ limits?
A: Our MOQ EXW is 1 pc for sample; MOQ FOB is 200pcs.(Depends on
different types of battery/battery pack)
Q: How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 5-7
days to arrive.
Q: How to proceed with the order when customers order products?
A: Inquiry-Confirmation-Send Proforma Invoice-Customer make
payment-Arrange production-ship the
goods to customers-Confirmation-Finish.
Q: How to make this payment?
A: TT, Paypal, Western Union.
